February 3, 2012.

Version 122 of the BeeLine Transmitter firmware has a bug associated with the timing of the beeps.  The expected behavior is that it will send out the ID String, followed by a "Number of Beeps", in this case 5.  It should then start over again with the ID String.  However,  after the beeps and before the callsign, there is an unexpectedly long delay.

The problem can be fixed by downloading the latest version of the windows program.  Run the program, issue a "Read" then a "Write" command.  The unexpectedly long delay will now be eliminated.

There is no need to updated the firmware on the transmitter.


                             2005-2017  BigRedBee, LLC. All rights reserved.