|
|
|
|
Above is a picture from the Pic Pac, with the Beeline running in APRS mode. Note that Lat/Lon are limited to 2 decimal places of accuracy per the APRS specification. The altitude is listed in meters.
The Kenwood can directly display the same information
Here we have a picture of the Pic Pac display with the Beeline running in Non-APRS mode. Notice the increased # of digits in the Lat/Lon. The altitude hasn't really changed, just an indication of the error commonly seen being reported from the GPS. THe '*' indicates 'current' gps data. If the the receivers view was hidden, you'd still see data, but the '*' would be displayed as a '-'.
And finally a bigger picture of the decoder setup. PicPac (on top) and the Yaesu VX-5R on the botton.
|
|
|
|
